All Categories

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000

manifold gauge

The manifold gauge is an essential tool used by automotive air conditioning and refrigeration workers plug into the system to measure refigerant pressure. Refrigerant — the fluid that cools your home or office air — circulates through pipes alongside its expansion valve on one side and compressor of another hand. The pressure at which the refrigerant is, hence it requires a precise amount for proper operation of all parts in this system. Both the high groove and low notch lines on this dual gauge manifold are connected to two separate gauges, one registered with a needle for pressure going into that line (high) or away from it (low). This is very beneficial due to the fact that cooling systems work at varying pressures in various locations. Moreover, the manifold gauge features a valve at which refrigerants can be evacuated or charged as required by workers.

This is important because to use the manifold gauge correctly, you will need to first connect the hoses of this device with specific ports on your coolingsystem. One is blue and it connects to the low-pressure port, one red that goes into the high-pressure port on air conditioner pipes; finally a yellow hose between them has direct connectivity towards refrigerant tank. They bring different things to the table, and each one hooks up to a specific part of your system.

How to use a manifold gauge for HVAC systems

After the hoses are firmly attached, he can start up the cooling system and closely observe the information appearing in his gauges. The low-pressure gauge will display a pressure reading of 50 to 70 psi, which is normal. With the pressure in deceleration (or no power), your high-pressure gauge should now be reading anywhere from 200 to 250 psi. Any value different from what is shown above might indicate a system error that requires attention.

In order to gauge the life of HVACwell, A manifolder is necessary. For instance, maintenance workers use this pressure readings to determine if a system is overcharged (has too much refrigerant) or undercharged (doesn't have enough). These two changes can either malfunction the system. The sides of the gauge types with manifolds are used to locate any possible leaks in the system. The reason you will want to discover leaks early on is simple: a leak can be the start of something more serious, which might mean costly repairs. This is where the manifold gauge comes in; it assists to detect and resolve these problems, ultimately making sure that the cooling system functions properly.

Why choose DABUND PIPE manifold gauge?

Related product categories

Not finding what you're looking for?
Contact our consultants for more available products.

Request A Quote Now

Get in touch